Halo H995ICAT Series Set of 3 LED Ceiling Lights

Item Information: Open Box Product

Model Number: H995ICAT

Condition:

• No visible wear

Disclaimer: First image is a stock photo used for style reference. Please refer to actual photos & item details when making a purchase.

Features:

Housing

• Double wall aluminum construction helps dissipate heat. The inner housing can be adjusted in the plaster frame to compensate for different ceiling materials.
• Designed for insulated ceilings in direct contact with insulation (May also be installed in non-insulated ceilings)
• The inner housing adjusts for ceilings up to 1” thick

Plaster Frame

• Galvanized steel die-formed construction
• The housing can be removed from plaster frame to provide access to the junction box
• Plaster frame features include:
  • Patented regressed locking screw positioned for securing hanger bars from below the ceiling
  • Cutouts for easily crimping hanger bars in position
  • Air-Tite aperture gasket is pre-installed
  • Halo identity embossed on plaster frame

Includes:

Got Nail!™

• Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
• Safety and guidance system prevents nail snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary
• Automatic leveling flange aligns the housing and lets you hold the housing in place with one hand while driving nails
• Five additional mounting points
• Mounting point on top for hanger wire connection
• Integral T-bar clips snaps onto T-bars - no additional clips required

Pass-N-Thru™bars

• Pass-N-Thru™ allows the bars to pass through each other for toolless shortening in tight spots less than 12" without removing from the plaster frame. Push bars together and flex at score lines until excess can be removed.
• Housing positions at any point within 24" joist span
• Bar hangers may be repositioned 90˚ on the frame on select housings
• Locking screw and multiple crimp points on plaster frame secure bars in place

Slide-N-Side™

• Slide-N-Side™ wire traps allow non-metallic (NM) sheathed cable to be installed without tools or without removing knockouts
• Allows wiring connections to be made outside the junction box
• Simply insert the cable directly into the trap after connections are made
• Accommodates the following standard non-metallic (NM) sheathed cable types for the U.S.: #14/2, #14/3, #12/2, #12/3
• 1/2" conduit pry-outs positioned to accommodate straight conduits runs [(4) 1/2" conduit pry-outs in NonIC housing]
• cULus Listed 24 in³ box volume, listed for through-branch (8) No. 12 AWG branch circuit 90˚ C conductors through the box

Quick Connect™

• Push wire nuts included, for speed & reliability
• Clear caps for wire connection visibility

Air-Tite™ Code Compliant

• ASTM E283 compliant

LED Module Connection

• Compatible Halo LED modules simply install with a plug-in line voltage wiring connector (UL and CSA Listed Luminaire Disconnect). This non-screw base LED connection preserves the high efficacy rating of the luminaire.

Compliance

• cULus Listed 1598 Luminaire
• cULus Damp Location Listed
• cULus Listed for Wet Location, covered ceiling, with select trims
• cULus Listed for feed through
• cULus listed for direct contact with insulation and combustible material
• Use with designated Halo LED systems for ENERGY STAR® certification
• Can be used for State of California Title 24 high efficacy compliance with designated Halo LED lighting systems
• Can be used for International Energy Conservation Code (IECC) high efficacy compliance with designated Halo LED lighting systems
• Air-Tite code compliant. Certified under ASTM E283; not exceeding 2.0 CFM (0.944 L/s) air leakage rate tested at a 1.57 psf (75 Pa) pressure differential
• Options to meet Trade Agreements Act requirements